125ns, 50ns SPST - NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1311 16 Pins 10nA 15V 16-TSSOP (0.173, 4.40mm Width)

  • Manufacturer: Analog Devices Inc.
  • NO: 84-ADG1311YRUZ-REEL7
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: pdf
  • Stock: 8613
  • Description: 125ns, 50ns SPST - NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1311 16 Pins 10nA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)


  • Delivery: Delivery
  • Payment: payment

In Stock

Please send RFQ , we will respond immediately.

authentication (1) authentication (2) authentication (3) authentication (4) authentication (5) authentication (6) authentication (7) authentication (8) authentication (9)

Purchase & Inquiry


User guide


You may place an order without registering to ICGNT.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.


1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.transport


Part Status Active
Mounting Type Surface Mount
Operating Temperature -40°C~105°C TA
Packaging Tape & Reel (TR)
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Technology CMOS
Operating Supply Current 220μA
Height Seated (Max) 1.2mm
RoHS Status ROHS3 Compliant
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Length 5mm
Operating Supply Voltage 12V
Bandwidth 600MHz
Lead Free Contains Lead
Max Supply Current 380μA
Number of Terminations 16
Factory Lead Time 8 Weeks
Max Supply Voltage 16.5V
Min Supply Voltage 5V
Resistance 200Ohm
Number of Pins 16
Interface Parallel
Lifecycle Status PRODUCTION (Last Updated: 4 weeks ago)
Pbfree Code no
Contact Plating Tin
Number of Functions 4
JESD-609 Code e3
Polarity Non-Inverting
Surface Mount YES
Max Power Dissipation 4.8mW
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 15V
Terminal Pitch 0.65mm
Base Part Number ADG1311
Pin Count 16
Number of Channels 4
Time@Peak Reflow Temperature-Max (s) 30
Power Dissipation 4.8mW
Subcategory Multiplexer or Switches
Qualification Status Not Qualified
Test Frequency 1MHz
Throw Configuration SPST
Turn On Delay Time 125 ns
Turn-Off Delay Time 50 ns
Max Dual Supply Voltage 16.5V
Dual Supply Voltage 15V
Supply Type Dual, Single
Min Dual Supply Voltage 5V
Neg Supply Voltage-Nom (Vsup) -15V
High Level Output Current 25mA
On-State Resistance (Max) 200Ohm
Off-state Isolation-Nom 80 dB
On-state Resistance Match-Nom 5Ohm
Switch-off Time-Max 60ns
Switch-on Time-Max 180ns
Multiplexer/Demultiplexer Circuit 1:1
Switch Circuit SPST - NC
Voltage - Supply, Dual (V±) ±15V
Current - Leakage (IS(off)) (Max) 10nA
Channel Capacitance (CS(off), CD(off)) 5pF 5pF
Switch Time (Ton, Toff) (Max) 125ns, 50ns
Charge Injection 2pC
Channel-to-Channel Matching (ΔRon) 5 Ω
Crosstalk -90dB @ 1MHz

ADG1311YRUZ-REEL7 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~105°C TA. 16 terminations have been made so far. A 4 channel electronic part produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 16 series. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Look for analog switch ic variants by searching with ADG1311. Analog switches have 200Ohm internal resistance. Please refer to the datasheets for 16 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. The analog switch ic is of the Dual, Single supply type and is cost-effective. 5V should be the lowest voltage fed to the electronic component. This multiplexer would work with 220μA current. A voltage higher than 380μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VA dual power supply should have at least 5V voltage attached. The electrical part can be operated at 12V voltage levels. The data can be transferred over a wide range of bandwidths, called 600MHz bandwidths.

ADG1311YRUZ-REEL7 Features

4 Channels
Switch Circuit: SPST - NC
220μA Supply Current
Bandwidth: 600MHz

ADG1311YRUZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG1311YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

  • Remote Powered Equipment
  • Avionics test equipment
  • Cable PC
  • PDAs
  • Mechanical reed relay replacement
  • Wireless Local Loop
  • Precision data acquisition
  • Central office
  • Fiber In The Loop (FITL)
  • High speed data transmission line cards

In Stock

Please send RFQ , we will respond immediately.