1 Channels 80mA per Channel 2.5μA 87 dB Instrumentational OP Amps 9V 3V~11V ±1.5V~5.5V ADA4932 16 Pins 16-VFQFN Exposed Pad, CSP

  • Manufacturer: Analog Devices Inc.
  • NO: 84-ADA4932-1YCPZ-R2
  • Package: 16-VFQFN Exposed Pad, CSP
  • Datasheet: pdf
  • Stock: 6153
  • Description: 1 Channels 80mA per Channel 2.5μA 87 dB Instrumentational OP Amps 9V 3V~11V ±1.5V~5.5V ADA4932 16 Pins 16-VFQFN Exposed Pad, CSP(Kg)


  • Delivery: Delivery
  • Payment: payment

In Stock

Please send RFQ , we will respond immediately.

authentication (1) authentication (2) authentication (3) authentication (4) authentication (5) authentication (6) authentication (7) authentication (8) authentication (9)

Purchase & Inquiry


User guide


You may place an order without registering to ICGNT.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.


1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.transport


Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 3 weeks ago)
Packaging Tape & Reel (TR)
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
Operating Supply Voltage 9V
Length 3mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Radiation Hardening No
Number of Pins 16
Package / Case 16-VFQFN Exposed Pad, CSP
Height 830μm
Width 3mm
Resistance 16MOhm
Mounting Type Surface Mount
Operating Temperature -40°C~105°C
Technology BIPOLAR
Operating Supply Current 9.6mA
Bandwidth 560MHz
Number of Functions 1
Nominal Supply Current 9.6mA
JESD-609 Code e3
Terminal Finish Matte Tin (Sn)
Terminal Position QUAD
Supply Voltage 5V
Base Part Number ADA4932
Pin Count 16
Surface Mount YES
Terminal Pitch 0.5mm
Number of Channels 1
Slew Rate 2800V/μs
Output Current per Channel 80mA
Input Offset Voltage (Vos) 2.2mV
Interface IC Type LINE DRIVER
Driver Number of Bits 1
Common Mode Rejection Ratio 87 dB
Dual Supply Voltage 5V
Differential Output YES
Voltage Gain 66dB
Negative Supply Voltage-Nom -5V
Power Supply Rejection Ratio (PSRR) 84dB
Current - Input Bias 2.5μA
Amplifier Type Differential
Interface Standard GENERAL PURPOSE
Out Swing-Min 3.2 V
Voltage - Supply, Single/Dual (±) 3V~11V ±1.5V~5.5V
Voltage - Input Offset 500μV

ADA4932-1YCPZ-R2 Overview

Packaged in a 16-VFQFN Exposed Pad, CSP case, the buffer op amp is ready to use. Differential-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be 16 terminations in the next few months. In this case, there are 16 pins on the board. Please take in mind that op amp should be run at 5V.  The op amp ic has an array of 16 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 2.2mV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~105°C  as far as operating temperature is concerned. An 9.6mA volt supply current is needed for this linear amplifier to operate. Maintain 66dB as the voltage gain. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of instrumentation amplifier is rated 9V voltage.  It is recommended to keep the buffer amps resistance within the range of 16MOhm.  The interface IC of the electronic part is classified as LINE DRIVER.  

ADA4932-1YCPZ-R2 Features

16 Pins
supply voltage of 5V
66dB voltage gain
Resistance of 16MOhm

ADA4932-1YCPZ-R2 Applications

There are a lot of Analog Devices Inc. ADA4932-1YCPZ-R2 Instrumentational OP Amps applications.

  • Broadcasting
  • Mobile phone
  • Signal amplification
  • Thermocouples
  • Semiconductor detectors
  • Communication device
  • Ultrasound transducers
  • Industrial control system
  • Multimedia playback equipment
  • Automotive sensors

In Stock

Please send RFQ , we will respond immediately.